Energy Savings Hub
See how much you may be losing—and what you could save. Built for factories, commercial buildings, and finance-minded teams.
Idle load waste calculator
Estimate spend that keeps running when the site is not fully “on”—baseload, phantom loads, and idle assets.
—
Connect metering to find which circuits drive overnight draw.
Automate data capture, alerts, and audit-ready exports on your real meters.
Power factor “goldmine”
Model rough penalty exposure below target PF and illustrative incentive headroom at high PF (rules vary by DISCOM).
—
—
Automate data capture, alerts, and audit-ready exports on your real meters.
SEC production calculator
Energy cost per unit produced vs. a benchmark SEC band (illustrative top-quartile).
—
—
Automate data capture, alerts, and audit-ready exports on your real meters.
Bill verification calculator
Compare billed amount to “meter kWh × average rate” to spot obvious gaps (simplified).
—
Automate data capture, alerts, and audit-ready exports on your real meters.
Power factor penalty calculator
Rough monthly impact if PF sits below a utility target (default 0.90).
—
Automate data capture, alerts, and audit-ready exports on your real meters.
Peak demand penalty estimator
Extra demand charges when recorded demand exceeds sanctioned demand.
—
Automate data capture, alerts, and audit-ready exports on your real meters.
SEC (specific energy) benchmarker
Your kWh per unit vs. a reference SEC for your sector.
—
Automate data capture, alerts, and audit-ready exports on your real meters.
Air compressor leakage cost
Ballpark cost of unloaded / leaking compressed-air run hours.
—
Automate data capture, alerts, and audit-ready exports on your real meters.
Motor efficiency upgrade (ROI)
IE-class uplift: illustrative savings and simple payback.
—
—
Automate data capture, alerts, and audit-ready exports on your real meters.
HVAC savings (+1°C)
Rule-of-thumb ~3% cooling energy per °C setpoint increase (climate & system dependent).
—
Automate data capture, alerts, and audit-ready exports on your real meters.
Lighting retrofit (LED)
Monthly savings from wattage reduction × hours × tariff.
—
Automate data capture, alerts, and audit-ready exports on your real meters.
Carbon footprint (grid kWh)
Convert monthly kWh to CO₂e using an adjustable grid factor (India grid often ~0.71–0.85+ kg/kWh; verify for your disclosure).
—
Automate data capture, alerts, and audit-ready exports on your real meters.